快速开始
快速开始体验 Cube Sandbox
准备开发环境
安装好 ripgrep ：
sudo apt install ripgrep -y
准备目录，克隆源代码，并准备镜像文件：
mkdir -p ~/work/code/cubesandbox/
cd ~/work/code/cubesandbox/
git clone https://cnb.cool/CubeSandbox/CubeSandbox
cd CubeSandbox/dev-env
./prepare_image.sh
输出为：
[prepare_image][INFO] Downloading image to /root/work/code/cubesandbox/CubeSandbox/dev-env/.workdir/OpenCloudOS-GenericCloud-9.4-20251120.0.x86_64.qcow2
这个镜像文件有一点大，1.1GB：
ls -lh /root/work/code/cubesandbox/CubeSandbox/dev-env/.workdir/OpenCloudOS-GenericCloud-9.4-20251120.0.x86_64.qcow2
-rw-r--r-- 1 root root 1.1G Apr 25 09:22 /root/work/code/cubesandbox/CubeSandbox/dev-env/.workdir/OpenCloudOS-GenericCloud-9.4-20251120.0.x86_64.qcow2
下载完成后继续：
[prepare_image][INFO] Resizing qcow2 in place to 100G
Image resized.
[prepare_image][OK] Image preparation finished
[prepare_image][INFO] Image path: /root/work/code/cubesandbox/CubeSandbox/dev-env/.workdir/OpenCloudOS-GenericCloud-9.4-20251120.0.x86_64.qcow2
[prepare_image][INFO] Starting guest root disk auto-grow workflow
[prepare_image][INFO] User : opencloudos
[prepare_image][INFO] SSH port : 10022
[prepare_image][INFO] Image : /root/work/code/cubesandbox/CubeSandbox/dev-env/.workdir/OpenCloudOS-GenericCloud-9.4-20251120.0.x86_64.qcow2
[run_vm][INFO] Booting OpenCloudOS 9 VM
[run_vm][INFO] Image : /root/work/code/cubesandbox/CubeSandbox/dev-env/.workdir/OpenCloudOS-GenericCloud-9.4-20251120.0.x86_64.qcow2
[run_vm][INFO] Login user : opencloudos
[run_vm][INFO] Password : opencloudos
[run_vm][INFO] SSH : ssh -p 10022 opencloudos@127.0.0.1
[run_vm][INFO] Cube API : http://127.0.0.1:13000 -> guest:3000
[run_vm][INFO] CubeProxy : http://127.0.0.1:11080 -> guest:80
[run_vm][INFO] CubeProxy : https://127.0.0.1:11443 -> guest:443
[run_vm][INFO] Background mode:
[run_vm][INFO] PID file : /root/work/code/cubesandbox/CubeSandbox/dev-env/.workdir/qemu.pid
[run_vm][INFO] Serial log : /root/work/code/cubesandbox/CubeSandbox/dev-env/.workdir/qemu-serial.log
[prepare_image][INFO] Waiting for guest SSH to become ready...
[prepare_image][OK] Guest SSH is ready
[prepare_image][INFO] Uploading grow_rootfs.sh to the guest...
Warning: Permanently added '[127.0.0.1]:10022' (ED25519) to the list of known hosts.
[prepare_image][OK] grow_rootfs.sh uploaded
[prepare_image][INFO] Running grow_rootfs.sh inside the guest...
Warning: Permanently added '[127.0.0.1]:10022' (ED25519) to the list of known hosts.
[grow_rootfs][INFO] Current root device : /dev/vda4
[grow_rootfs][INFO] Current root filesystem : xfs
[grow_rootfs][INFO] Growing partition /dev/vda4 to the end of disk /dev/vda
[grow_rootfs][INFO] Partition already fills the disk, continuing to grow the filesystem
[grow_rootfs][WARN] NOCHANGE: partition 4 is size 208138207. it cannot be grown
[grow_rootfs][INFO] Online-growing XFS root filesystem
meta-data=/dev/vda4 isize=512 agcount=43, agsize=606016 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=1
= reflink=1 bigtime=1 inobtcount=1 nrext64=1
data = bsize=4096 blocks=26017275, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=16384, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
[grow_rootfs][OK] XFS root filesystem grown
[grow_rootfs][OK] Root disk expansion finished, current usage:
Filesystem Size Used Avail Use% Mounted on
/dev/vda4 100G 3.1G 97G 4% /
[prepare_image][OK] Guest root filesystem expansion finished
[prepare_image][INFO] Uploading setup_selinux.sh to the guest...
Warning: Permanently added '[127.0.0.1]:10022' (ED25519) to the list of known hosts.
[prepare_image][OK] setup_selinux.sh uploaded
[prepare_image][INFO] Switching guest SELinux to permissive...
Warning: Permanently added '[127.0.0.1]:10022' (ED25519) to the list of known hosts.
[setup_selinux][INFO] Current SELinux mode: Enforcing
[setup_selinux][INFO] Switching SELinux to permissive for the current boot...
[setup_selinux][OK] SELinux is now permissive at runtime
[setup_selinux][INFO] Persisting SELinux=permissive in /etc/selinux/config
[setup_selinux][OK] Persistent SELinux mode updated to permissive
[setup_selinux][OK] SELinux setup finished (mode: Permissive)
[prepare_image][OK] Guest SELinux is now permissive (persistent)
[prepare_image][INFO] Uploading setup_path.sh to the guest...
Warning: Permanently added '[127.0.0.1]:10022' (ED25519) to the list of known hosts.
[prepare_image][OK] setup_path.sh uploaded
[prepare_image][INFO] Adding /usr/local/{sbin,bin} to login PATH and sudo secure_path...
Warning: Permanently added '[127.0.0.1]:10022' (ED25519) to the list of known hosts.
[setup_path][INFO] Installing login shell PATH override at /etc/profile.d/cubesandbox-path.sh
[setup_path][OK] Login shell PATH override installed
[setup_path][INFO] Validating /etc/sudoers.d/00-cubesandbox-path with visudo -cf
[setup_path][OK] sudo secure_path updated at /etc/sudoers.d/00-cubesandbox-path
[prepare_image][OK] Guest PATH setup finished
[prepare_image][INFO] Uploading setup_banner.sh to the guest...
Warning: Permanently added '[127.0.0.1]:10022' (ED25519) to the list of known hosts.
[prepare_image][OK] setup_banner.sh uploaded
[prepare_image][INFO] Installing welcome banner inside the guest...
Warning: Permanently added '[127.0.0.1]:10022' (ED25519) to the list of known hosts.
[setup_banner][INFO] Installing welcome banner at /etc/profile.d/cubesandbox-banner.sh
[setup_banner][OK] Welcome banner installed at /etc/profile.d/cubesandbox-banner.sh
[prepare_image][OK] Welcome banner installed inside the guest
[prepare_image][INFO] Uploading setup_autostart.sh to the guest...
Warning: Permanently added '[127.0.0.1]:10022' (ED25519) to the list of known hosts.
[prepare_image][OK] setup_autostart.sh uploaded
[prepare_image][INFO] Installing cube-sandbox-oneclick.service unit (not enabled)...
Warning: Permanently added '[127.0.0.1]:10022' (ED25519) to the list of known hosts.
[setup_autostart][INFO] Writing systemd unit: /etc/systemd/system/cube-sandbox-oneclick.service
[setup_autostart][OK] Unit file written
[setup_autostart][INFO] Reloading systemd manager configuration...
[setup_autostart][OK] systemd daemon-reload done
[setup_autostart][INFO] cube-sandbox-oneclick.service is installed but NOT enabled.
[setup_autostart][INFO] Run dev-env/cube-autostart.sh from the host to turn it on.
[setup_autostart][OK] Autostart unit setup finished
[prepare_image][OK] Autostart unit installed inside the guest (enable it later via dev-env/cube-autostart.sh)
[prepare_image][INFO] Requesting graceful shutdown from the guest...
[prepare_image][OK] Guest has shut down cleanly
[prepare_image][OK] All done:
[prepare_image][OK] 1. Image downloaded
[prepare_image][OK] 2. qcow2 resized to 100G
[prepare_image][OK] 3. VM booted and guest root filesystem expanded
[prepare_image][OK] 4. Guest SELinux set to permissive
[prepare_image][OK] 5. /usr/local/{sbin,bin} added to login PATH and sudo secure_path
[prepare_image][OK] 6. Welcome banner installed inside the guest
[prepare_image][OK] 7. cube-sandbox-oneclick.service unit installed (not enabled)
[prepare_image][OK] 8. VM powered off cleanly
[prepare_image][INFO] You can now run ./run_vm.sh to start the dev VM
这个脚本 ./prepare_image.sh 是一键构建和初始化开发环境（Virtual Machine, 虚拟机）的自动化准备脚本。
简单来说，它的核心工作是：下载一个纯净的操作系统镜像 -> 扩容 -> 启动它 -> 连入其中进行各种开发环境所需的系统级配置 -> 最后安全关机，留下一个配置好的镜像供后续使用。
根据你的输出日志，它具体执行了以下 8 个步骤：
- 下载基础系统镜像 (Image downloaded)
脚本首先将 OpenCloudOS 9.4 的云镜像（qcow2 格式）下载到了你本地的 .workdir 隐藏目录下。这是一个纯净的初始操作系统。
- 外部扩容虚拟磁盘 (qcow2 resized to 100G)
下载的原始镜像通常很小（比如只有几 GB）。脚本使用工具（如 qemu-img）在宿主机层面将这个 qcow2 虚拟磁盘文件的最大容量上限扩展到了 100GB。
- 后台启动虚拟机并映射端口 (Booting OpenCloudOS 9 VM)
脚本使用 QEMU 在后台启动了这个虚拟机，并配置了一系列端口映射（把虚拟机的端口暴露给你当前的物理机）：
- SSH: 本地
10022端口 -> 虚拟机22端口（账号密码均为opencloudos）。 - Cube API: 本地
13000-> 虚拟机3000。 - CubeProxy: 本地
11080/11443-> 虚拟机80/443。 启动后，脚本一直等待直到虚拟机的 SSH 服务就绪。
- 内部扩展根文件系统 (Guest root filesystem expanded)
由于第 2 步只是扩大了“物理硬盘”的容量，虚拟机系统内部的“分区”还没变大。
- 脚本通过 SSH 将
grow_rootfs.sh脚本传进虚拟机并运行。 - 在虚拟机内部，它自动将
/dev/vda4分区和 XFS 文件系统扩容。 - 结果：系统的根目录
/成功获取了全部 100GB 的空间（目前只用了 3.1GB，剩余 97GB）。
- 放宽 SELinux 权限 (Guest SELinux set to permissive)
- 为了避免在开发过程中遇到复杂的权限阻碍，脚本上传并运行了
setup_selinux.sh。 - 它将虚拟机的 SELinux 状态从严格的
Enforcing改为了宽容模式Permissive（只记录警告，不拦截操作）。 - 并且修改了
/etc/selinux/config确保以后每次重启都生效。
- 配置环境变量 PATH (Guest PATH setup)
- 上传并运行
setup_path.sh。 - 它将
/usr/local/sbin和/usr/local/bin添加到了用户的登录环境变量（/etc/profile.d/）以及sudo的安全路径（/etc/sudoers.d/）中。 - 目的：以后你自己编译或安装在这些目录下的开发工具，可以直接敲命令运行，不需要输入绝对路径。
- 安装欢迎词横幅 (Welcome banner installed)
- 上传并运行
setup_banner.sh。 - 在
/etc/profile.d/下配置了一个横幅（Banner）。以后只要有人通过 SSH 登录进这个虚拟机，就会看到打印出来的提示信息或 Logo。
- 配置自启动服务，并安全关机 (Autostart unit installed & powered off cleanly)
- 上传了
setup_autostart.sh并创建了一个 systemd 服务cube-sandbox-oneclick.service，用于以后一键启动你的核心应用。注意：目前只是安装了，并没有激活（Not enabled）。 - 所有配置完成后，脚本向虚拟机发送关机指令（Graceful shutdown）。
- 虚拟机安全关机。
正如日志最后一行提示的：
[prepare_image][INFO] You can now run ./run_vm.sh to start the dev VM
这个 100G 的、已经配置好开发环境的镜像已经准备就绪了。之后启动这个开发环境，保持此终端不关：
./run_vm.sh
新开一个终端，进入上一步准备好的环境：
cd work/code/cubesandbox/
cd CubeSandbox/dev-env && ./login.sh
输出为：
[login][INFO] Logging into opencloudos@127.0.0.1:10022 and switching to root (sudo -i)
Warning: Permanently added '[127.0.0.1]:10022' (ED25519) to the list of known hosts.
____ _ ____ _ _
/ ___| _| |__ ___/ ___| __ _ _ __ __| | |__ _____ __
| | | | | | '_ \ / _ \___ \ / _` | '_ \ / _` | '_ \ / _ \ \/ /
| |__| |_| | |_) | __/___) | (_| | | | | (_| | |_) | (_) > <
\____\__,_|_.__/ \___|____/ \__,_|_| |_|\__,_|_.__/ \___/_/\_\
Welcome to the Cube Sandbox development environment!
* Guest OS : OpenCloudOS 9 (qcow2, 100G root disk)
* Project repo : https://github.com/tencentcloud/CubeSandbox
* Install cmd : curl -sL https://cnb.cool/CubeSandbox/CubeSandbox/-/git/raw/master/deploy/one-click/online-install.sh | MIRROR=cn bash
* Cube API : http://127.0.0.1:3000 (from guest) / http://127.0.0.1:13000 (from host)
This VM is a disposable dev environment; do not use it for production.
[root@localhost ~]#
文档提示： 该命令会把你送进一台一次性的 Linux 环境中，后续所有安装都在这里进行，不会污染你的宿主机。
继续启动沙箱服务：
curl -sL https://cnb.cool/CubeSandbox/CubeSandbox/-/git/raw/master/deploy/one-click/online-install.sh | MIRROR=cn bash
这个命令在执行时会报错：
> [cube-proxy 2/8] RUN mkdir -p /data/log/cube-proxy/ /usr/local/openresty/nginx/conf/global/ /usr/local/openresty/nginx/certs/ && sed -i "s#https\?://dl-cdn.alpinelinux.org/alpine#https://mirrors.tuna.tsinghua.edu.cn/alpine#g" /etc/apk/repositories && apk update && apk add tcpdump && apk add vim && apk add tzdata && apk add python3 && apk add py3-pip && apk add bpftrace busybox curl ethtool file gawk inetutils-telnet iperf iperf3 iproute2 netcat-openbsd net-tools sysstat wget && pip3 install -i "https://pypi.tuna.tsinghua.edu.cn/simple" pythonping requests && cp /usr/share/zoneinfo/Asia/Shanghai /etc/localtime && echo "Asia/Shanghai" > /etc/timezone:
0.070 fetch https://mirrors.tuna.tsinghua.edu.cn/alpine/v3.17/main/x86_64/APKINDEX.tar.gz
0.169 ERROR: https://mirrors.tuna.tsinghua.edu.cn/alpine/v3.17/main: remote server returned error (try 'apk update')
0.169 WARNING: Ignoring https://mirrors.tuna.tsinghua.edu.cn/alpine/v3.17/main: No such file or directory
0.169 fetch https://mirrors.tuna.tsinghua.edu.cn/alpine/v3.17/community/x86_64/APKINDEX.tar.gz
0.265 ERROR: https://mirrors.tuna.tsinghua.edu.cn/alpine/v3.17/community: remote server returned error (try 'apk update')
0.265 WARNING: Ignoring https://mirrors.tuna.tsinghua.edu.cn/alpine/v3.17/community: No such file or directory
0.265 2 errors; 85 distinct packages available
------
failed to solve: process "/bin/sh -c mkdir -p /data/log/cube-proxy/ /usr/local/openresty/nginx/conf/global/ /usr/local/openresty/nginx/certs/ && sed -i \"s#https\\?://dl-cdn.alpinelinux.org/alpine#${ALPINE_MIRROR_URL}#g\" /etc/apk/repositories && apk update && apk add tcpdump && apk add vim && apk add tzdata && apk add python3 && apk add py3-pip && apk add bpftrace busybox curl ethtool file gawk inetutils-telnet iperf iperf3 iproute2 netcat-openbsd net-tools sysstat wget && pip3 install -i \"${PIP_INDEX_URL}\" pythonping requests && cp /usr/share/zoneinfo/Asia/Shanghai /etc/localtime && echo \"Asia/Shanghai\" > /etc/timezone" did not complete successfully: exit code: 2
看错误日志是说 Alpine 3.17 版本太老，已经停止维护 (EOL)，清华大学开源镜像站（TUNA）已经清理并下架了该版本的软件包。因此服务器返回了 remote server returned error (try ‘apk update’) 和 No such file or directory（404 ）。
给官方提交了一个 bug： https://github.com/TencentCloud/CubeSandbox/issues/85
在正式修复之前，先看看能不能临时解决。先把脚本下载下来：
wget https://cnb.cool/CubeSandbox/CubeSandbox/-/git/raw/master/deploy/one-click/online-install.sh -O online-install.sh
直接执行本地已经下载好的这个 MIRROR=cn bash ./online-install.sh 脚本：
MIRROR=cn bash ./MIRROR=cn bash ./online-install.sh
然后发现已经更新，上面的问题解决了。继续执行，发现报错 xfs：
[one-click] ERROR: The filesystem that will host /data/cubelet is on '/' (type: ext4), which is not XFS.
Cube Sandbox requires the /data/cubelet directory to reside on an XFS filesystem.
Options:
1. Mount a dedicated XFS-formatted partition at /data/cubelet:
mkfs.xfs /dev/<your-partition>
mount /dev/<your-partition> /data/cubelet
2. Ensure the parent path (/) itself is on XFS.
我的磁盘分区如下：
lsblk -f
NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINTS
nvme0n1
│
├─nvme0n1p1
│
├─nvme0n1p2
│ vfat FAT32 560E-DDD5 1013.2M 1% /boot/efi
├─nvme0n1p3
│ │ LVM2_m LVM2 v3SRzN-3z22-OLDA-LHRf-q5cO-uvTg-eniAqS
│ ├─pve-swap
│ │ swap 1 530d218b-6bf8-4bff-b5a9-8b2b09c4dcfe [SWAP]
│ └─pve-root
│ ext4 1.0 771feb17-395e-42c6-94a9-eb9f67ad888f 3.1T 5% /
└─nvme0n1p4
ext4 1.0 85d49f17-ff26-4a67-87ed-2020014c3a8f
目前是安装了 pve9. 准备从 771feb17-395e-42c6-94a9-eb9f67ad888f 这个 3.1T 的分区拆出来 512G，作为一个新的分区，然后格式化为 xfs 挂在到 /data/cubelet。
先安装 parted 软件：
apt-get update
apt-get install parted